In questa sezione potrete trovare l'elenco completo dei plugins, firmware e software rilasciati da MiniDSP.
Una volta acquisto il prodotto riceverete per email il link attraverso il quale poter scaricare il file.
Rev 1.11 / Oct 2016
- New Mac OSx build for support of Sierra gatekeeper new settings. App is now certified.
- Bug Fix: If load more than 5biquads under advanced mode, throwing error.
Rev 1.09 - IMPORTANT NOTE for upgrades: Note that the DSP configuration was modified and it's therefore recommended to perform a backup of your old configuration first if you're doing an upgrade. Please read the "Read Me" file first.
Beta plug-in fixing few things:
- Fixing RMS input metering
- 0.1dB gain on input/output gain
- Fix import frequency response
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
miniDSP 2x4 2way advanced, Win&Mac build
Rev v 1.14 / Oct 2016
- New Mac OSx build for support of Sierra gatekeeper new settings. App is now certified.
- Bug Fix: If load more than 5biquads under advanced mode, throwing error.
Rev v1.12 / Sept 2015
- Fix for the bypass button on the Advanced Biquad section. Correctly replotting the graph.
Rev v1.11 / Release date June 2015
- New build to fix a compatibility issue with latest Adobe Air update causing the software to not open correctly. No firmware upgrade required, only minor software issue.
Rev 1.10 / Oct 2013
- Fixing RMS input metering
- 0.1dB gain on input/output gain
- Fix import frequency response
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
Plug-in for the miniDSP 8x8/10x10HD platforms, 48kHz sample rate / Mac/Windows versions
Rev 1.09 / Oct 2016
- New Mac OSx build for support of Sierra gatekeeper settings. App is now certified.
Rev 1.08 / Sept 2016 - Firmware revision 2.10
1. Adding Hardware ID to prevent cross platform connection
2. Must upgrade the firmware to the latest version (v2.10) included inside the ZIP file to be able to connect to unit
3. Fix for power cycle potential noise via firmware
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
miniDSP 2x4 HD1 plugin with FIR,IIR, USB audio for 2x4 HD platforms only. Do not load on other hardware units.
Release log:
REV 1.09 / March 2017
Update steps: Upgrade the plugin, upgrade the XMOS firmware as per user manual. Connect to the unit with the plugin (you must be live and synchronized). Restore to default all your configuration or click "update DSP" to update your DSP configuration.
1. Updated minidsp.bin to fix the bug of meter keep display a level when SPDIF signal was removed
2. Fixed the compressor noise bug with incorrect values for very low attack.
3. Added .net4.6 bridge for Windows 10
In some very rare cases, we've seen that some units can't connect with Win10.
If it doesn't connect in Windows 10, please try to rename MiniDSP.exe to MiniDSP_old.exe and
rename MiniDSP_net4.exe to MiniDSP.exe in the 'C:\Program Files\miniDSP\<MiniDSP-2x4-HD or DDRC-24>\add' folder to use the .net4.6 bridge)
4. Update to firmware 1.6 which added minidsp IR remote support
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
Plug-in for the miniDSP 2x8/4x10HD platforms, 96kHz sample rate / Mac&Windows versions
Rev 1.11 / Oct 2016 - OSx update only
- New Mac OSx build for support of Sierra gatekeeper settings. App is now certified.
Rev 1.10 / Sept 2016 - Revision 2.10 firmware + Plugin update / Recommended
1. Allowing nanoDIGI xml file stored on PC to be loaded by this plugin to maintain compatibility
2. Pop-up and ask for permission to correct the xml file format if a user loaded a nanoDIGI xml into this plugin
3. Must upgrade the firmware to the latest version (v2.10) included inside the ZIP file to be able to connect to unit
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
miniDSP Xover 2way with Graphic Equalizer
v1.04/ Oct 2016
- New Mac OSx build for support of Sierra gatekeeper new settings. App is now certified.
v1.03: Update to solve plugin not booting up correctly with latest Adobe Air upgrade.
- Un-install old version before the update
- Mac OS X support with .dmg file
- Release date 08/02/2011
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
miniDSP 2x4 4way advanced plug-in, Win&Mac build
v1.13 / Oct 2016
- New Mac OSx build for support of Sierra gatekeeper new settings. App is now certified.
- Bug Fix: If load more than 5biquads under advanced mode, software was throwing error. Problem now solved.
V1.11 / Sept 2015
- New build to fix a compatibility issue with latest Adobe Air update causing the software to not open correctly. No firmware upgrade required, only minor software issue.
- Fix for the Advanced biquad bypass bug (not clearing the graph)
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
nanoDIGI 2x8 plug-in & firmware files for Windows/Mac platforms -
Rev 2.01 / Oct 2016 / Minor update
- New Mac OSx build for support of Sierra gatekeeper new settings. App is now certified.
Rev 1.09 / June 2016
1. Adding Hardware ID to prevent cross platform connection
2. Must upgrade the firmware to the latest version (v2.9) included inside the ZIP file to be able to connect to unit
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
Plug-in and firmare files for the miniSHARC kit running at 48kHz, Win& Mac build
Rev 1.10 / March 2017
1. Updated minidsp.bin (15Mar2017) to fix the bug of not allowing to set delay to 0 for old config files. Improved response for low frequency filters
2. Updated MCU firmware to v2.23 for minidsp IR remote support.
3. Added .net4.6 bridge for Windows 10
(On Windows 10, the old .net3.5 bridge will pop-up 'by-default' when connecting.
If it doesn't connect in Windows 10, please try to rename MiniDSP.exe to MiniDSP_old.exe and rename MiniDSP_net4.exe to MiniDSP.exe in the 'C:\Program Files\miniDSP\<plugin name>\add' folder to use the .net4.6 bridge)
4. (For OpenDRC-2x2 only) Added minidsp_OpenDRC_inv.bin (inside the 'add' folder) for user to rename it to minidsp.bin to solve polarity inverted problem on AN-FP/DA-FP. Steps are as follow:
a) Browse to 'C:\Program Files\miniDSP\<plugin name>\add' folder
b) Rename minidsp.bin to minidsp_old.bin
c) Rename of minidsp_OpenDRC_inv.bin to minidsp.bin
d) Connect to plugin and make sure you're live and synchronized. restore to default to reflash the DSP firmware.
Rev 1.9 / Oct 2016
- New build for Mac OSx Sierra compatibility - No change to firmware so no upgrade is required if you aren't running into issues.
Rev 1.8 / June 2016
- Including miniSHARC firmware rev 2.18 / upgrade to latest rev
- Log of change
PIC: Fix the Vol-FP speed of response
PIC: Fix the SRC4382 DIT Status bits
DSP: (miniSHARC 4x10) DIR will output zero when unlock to the clock
PIC: DAC8 will be mute when init DSP
Rev v1.8 / Release June 2015
- New build to fix a compatibility issue with latest Adobe Air update causing the software to not open correctly.
Rev V1.7 / Release date 01/08/2014
- Allow users to restore whole board back to default following an incorrect plug-in synchronization
- Loaded the latest DSP binary to make sure SPDIF is working after restore to default
- Warning: Requires a DSP firmware upgrade to be able to enjoy features above.
Step by Step DSP firmware upgrade:
1) Disconnect outputs to your audio equipment. This step is very important!
2) Make a backup of your 4 x setting.xml configurations stored in My Documents\MiniDSP\miniSHARC-4x8\setting and copy them to another folder of your PC
3) Install this new plug-in on your PC. It will automatically overwrite the older plug-in install file.
4) Connect with the plug-in by clicking on the Green sync button
5) On the first dialog box at synchronization, Make sure to select "Upgrade & Synchronize" (if you have that Option) OR Click Restore to Default. This step is very important to reflash
6) You can now load the saved/backed up configuration you had and reconnect your equipment.
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
Plug-in & firmware files for the miniSHARC kit running at 96kHz, Win&Mac builds.
Rev 1.10 / March 2017
1. Updated minidsp.bin (15Mar2017) to fix the bug of not allowing to set delay to 0 for old config files. Improved response for low frequency filters
2. Updated MCU firmware to v2.23 for minidsp IR remote support.
3. Added .net4.6 bridge for Windows 10
(On Windows 10, the old .net3.5 bridge will pop-up 'by-default' when connecting.
If it doesn't connect in Windows 10, please try to rename MiniDSP.exe to MiniDSP_old.exe and rename MiniDSP_net4.exe to MiniDSP.exe in the 'C:\Program Files\miniDSP\\add' folder to use the .net4.6 bridge)
4. (For OpenDRC-2x2 only) Added minidsp_OpenDRC_inv.bin (inside the 'add' folder) for user to rename it to minidsp.bin to solve polarity inverted problem on AN-FP/DA-FP. Steps are as follow:
a) Browse to 'C:\Program Files\miniDSP\\add' folder
b) Rename minidsp.bin to minidsp_old.bin
c) Rename of minidsp_OpenDRC_inv.bin to minidsp.bin
d) Connect to plugin and make sure you're live and synchronized. restore to default to reflash the DSP firmware.
Rev 1.9 / Oct 2016
- New build for Mac OSx Sierra compatibility - No change to firmware so no upgrade is required if you aren't running into issues.
Rev 1.8 + fw2.18 / June 2016
- Including miniSHARC firmware rev 2.18 / upgrade to latest rev as per user manual
- Log of changes
PIC: Fix the Vol-FP speed of response
PIC: Fix the SRC4382 DIT Status bits
DSP: (miniSHARC 4x10) DIR will output zero when unlock to the clock
PIC: DAC8 will be mute when init DSP
Rev v1.8 / Release June 2015
- New build to fix a compatibility issue with latest Adobe Air update causing the software to not open correctly. No firmware upgrade required, only minor software issue.
Rev V1.7 / Release date 01/08/2014
- Update of internal DSP firmware binary to match the latest version
- Fix of the over MIPS use, I2S slave and master mode. See user manual.
- Warning: Requires a DSP upgrade to be able to enjoy features above.
Step by Step DSP firmware upgrade:
1) Disconnect outputs to your audio equipment. This step is very important!
2) Make a backup of your 4 x setting.xml configurations stored in My Documents\MiniDSP\miniSHARC-4x8-96k\setting and copy them to another folder of your PC
3) Install this new plug-in on your PC. It will automatically overwrite the older plug-in install file.
4) Connect with the plug-in by clicking on the Green sync button
5)Make sure to select "Upgrade & Synchronize". This step is very important to reflash
6) You can now load the saved/backed up configuration you had and reconnect your equipment.
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
Rev 2.05 - March 2017
1. Updated minidsp.bin (15Mar2017) to fix the bug of not allowing to set delay to 0 for old config files. Improved response for low frequency filters
2. Updated MCU firmware to v2.23 for minidsp IR remote support.
3. Added .net4.6 bridge for Windows 10
(On Windows 10, the old .net3.5 bridge will pop-up 'by-default' when connecting.
If it doesn't connect in Windows 10, please try to rename MiniDSP.exe to MiniDSP_old.exe and rename MiniDSP_net4.exe to MiniDSP.exe in the 'C:\Program Files\miniDSP\\add' folder to use the .net4.6 bridge)
4. (For OpenDRC-2x2 only) Added minidsp_OpenDRC_inv.bin (inside the 'add' folder) for user to rename it to minidsp.bin to solve polarity inverted problem on AN-FP/DA-FP. Steps are as follow:
a) Browse to 'C:\Program Files\miniDSP\\add' folder
b) Rename minidsp.bin to minidsp_old.bin
c) Rename of minidsp_OpenDRC_inv.bin to minidsp.bin
d) Connect to plugin and make sure you're live and synchronized. restore to default to reflash the DSP firmware.
Rev 2.04 / Oct 2016
- New build for Mac OSx Sierra compatibility - No change to firmware so no upgrade is required if you aren't running into issues.
Rev 2.03 / June 2016
- Including miniSHARC firmware rev 2.18 / upgrade to latest rev
- Log of change
PIC: Fix the Vol-FP speed of response
PIC: Fix the SRC4382 DIT Status bits
DSP: (miniSHARC 4x10) DIR will output zero when unlock to the clock
PIC: DAC8 will be mute when init DSP
Rev 2.03 / Sept 2015
- Update for Adobe Air upgrade fix
- Includes miniSHARC firmware 2.17
Revision 2.02 / Issue date 24/11/2014
Latest version of the OpenDRC 2x2 plug-in for the OpenDRC DI/AN platforms - Mac/Win support.
- Allow users to restore whole borad back to default following an incorrect plug-in synchronization
- Using the latest stable firmware with fix for low frequency IIR noise for all EQ/Xover filters
- Please pay attention to the following Upgrade steps. Units shipped before 11/07/2012 will require an MCU firmware upgrade. Please download the user manual to make sure you're familiar with the firmware process.
Step by Step upgrade:
1) Disconnect outputs to your audio equipment. This step is very important!
2) Make a backup of your 4 x setting.xml configurations stored in My Documents\MiniDSP\OpenDRC-2x2\setting and copy them to another folder of your PC
3) Install this new plug-in on your PC. It will automatically overwrite the older plug-in install file.
4) Connect with the plug-in by clicking on the Green sync button
5) Make sure to select "Upgrade & Synchronize". This step is very important to reflash the DSP configuration.
6) You can now load the saved/backed up configuration you had and reconnect your equipment.
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
Dirac series Utility for DDRC-22 series - Must be used together with latest Dirac Live tools
v1.06 / April 2017 - FW 2.23
Support for latest IR remote. PLease update the firmware as per user manual.
v1.06 / Oct 2016 - OSx build only
- New Mac OSx build for support of Sierra gatekeeper new settings. App is now certified.
- Removing activation link menu since the new Dirac Live build do not require activation anymore.
v1.05 release - Sept 2015
- Adding support for control of the attenuation (0/-3/-6/-10dB) introduced by Dirac for internal headroom. Use with caution at 0dB since you could potentially overdrive the internal DSP path. (i.e. causing 0dBFs clicks). Bottom line: Don't play with the settings if you don't need to.
10,00 €
Inclusa IVA . Si applicano le spese di spedizione .
Spedizione gratuita nei seguenti Paesi: Mostra di più Mostra meno
Dirac Live Calibration tools for DDRC-22 series
Build v1.2.1 / Nov 2016
- Fix for Dirac server licensing potential error of "No valid license"- Unlimited install count + no username/password require for install.
Build v1.2.0 / Oct 2016
- Support for DDRC-24 (no need for script anymore)
- New license registration process doesn't require activation anymore on first installation. Dirac Live will automatically handshake with the hardware License on your unit to activate it.
Build 8244 / April 2016
- Fixing unable to recognize Umik-1 under MAC OSx 10.11.4
Build 6937 / July 2015
- Adding Mac OSx version - Please read user manual for additional information.
- Please download the DDRC-22 utility file separately for the Mac firmware upgrade tools.
Build 6607 / June 2015
Fixing minor bugs:
- Crash of software at boot of the application in some specific case due to the DLL being loaded twice. Fix on Dirac Live software.
- NOTE: No update is required unless you're seeing a crash of software at boot up. No restore to default, no firmware upgrade required if upgrading from Build 5939.
Build 5939 / April 15th 2015:
Fixing minor bugs:
1. Whenever a filter is dragged into the slot, the slot is now high-lighted as active slot.
2. For DDRC-22, load a project, go directly to filter design page, DLCT crash bug fixed.
3. On win8 32bit and some specific hardware configuration, DLCT crashed at gain and delay calculations after user clicked optimize button in filter design page. No more GPF issue.
4. Added levels label (in dB unit) beside the master and channel volume sliders so that users can know the volume levels when adjusting the sliders.
Installation steps for existing customers:
- Download software and Install new DDRC-22 utility & new Dirac Live Calibration Tools. They will updated automatically so no need to uninstall.
- If you've missed the previous update (i.e. Build 5692 in Feb 2015), you will need to open the DDRC-22 utility and restore to default such that it clears all the firmware.
- If you're upgrading from buld 5692, this software revision is only doing minor graphical bug fix. You will be able to load an existing project from a previous version. (i.e. no need to rerun your measurements)
10,00 €
Inclusa IVA . Si applicano le spese di spedizione .
Spedizione gratuita nei seguenti Paesi: Mostra di più Mostra meno
Dirac Live Calibration tools for DDRC-88 series with DDRC-88A tools
DDRC-88A software for both DDRC-88A units and DDRC-88BM. One software does it all!
Rev 1.7 + Firmware v2.23 / April 2017
1. Master Volume readings use deep color instead of white color
2. Delay of value 0 will not be force set to a non-zero value when send to DSP so that both 0 delay and minimum non-zero delay will be supported.
3. New firmware v2.23 also support minidsp IR remote for sale on webshop as accessorie
4. Included new minidsp.bin to fix:
a) New type of filters for better low frequency behavior
b) Closing Dirac app will mute the audio of non-BM version and need power-cycle to recover,
1. Detailed warning when doing firmware update (i.e. forcing to open box if trying to do update from very old firmware)
Rev1.5 + Firmware 2.22 / Nov 2016
- Upgrade from 1.4 for customer who are seeing (Stimulus failed error during measurement). Error related to USB timing on certain WinOS platforms.
- Upgrade of GUI for new features. Please consult the user manual- One GUI + one FW for both customers of DDRC-88A and DDRC-88BM. If you haven't purchased the DDRC-88BM license, tabs for control of crossover/bass management are available while offline (i.e. can see features). Note however that in online mode, the unit will not run any of the processing of BM plugin for unlicensed units.
- Improved Dirac live licensing (no user name/password).
- Remove need for running additional script (new DLL)
- Improved firmware (v2.22) to improve power up sequence.
IMPORTANT: Some of you might be running some very outdated firmware. To upgrade firmware, please check txt and readmefirst pdf inside the ZIP file. Thanks.
Any questions/issues, please start a tech support ticket with our team.
------------------------------
LEGACY log from previous versions.
Build 8244 / April 2016
- Fixing unable to recognize Umik-1 under MAC OSx 10.11.4
Build 6937 / July 2015
- Adding Mac OSx version - Please read user manual for additional information.
- Please download the DDRC-88 utility file separately for the Mac firmware upgrade tools.
Build 6607 released on June 1st 2015:
Fixing minor bugs:
- Crash of software at boot of the application in some specific case due to the DLL being loaded twice. Fix on Dirac Live software.
- NOTE: No update is required unless you're seeing a crash of software at boot up. No restore to default, no firmware upgrade required if upgrading from Build 5939.
Build 5939 released on April 15th 2015:
Fixing minor bugs:
1. Whenever a filter is dragged into the slot, the slot is now high-lighted as active slot.
2. On win8 32bit and some specific hardware configuration, DLCT crashed at gain and delay calculations after user clicked optimize button in filter design page. No more GPF issue.
3. Added levels label (in dB unit) beside the master and channel volume sliders so that users can know the volume levels when adjusting the sliders.
4. Adding support for the multizone setup. See application note here.
Installation steps for existing customers:
- Download software and Install new DDRC-88 utility & new Dirac Live Calibration Tools. They will updated automatically so no need to uninstall your previous version.
- If you've missed the previous update (i.e. Build 5692 in Feb 2015), you will need to open the DDRC-88 utility and restore to default such that it clears all the DSP configurations.
- With these minor DLCT software change, there isn't any need to redo your measurements. You can safely open and load a new project.
10,00 €
Inclusa IVA . Si applicano le spese di spedizione .
Spedizione gratuita nei seguenti Paesi: Mostra di più Mostra meno
nanoAVR BM plug-in for the nanoAVR HD/HDA.
VERSION LOG
v1.10 / Oct 2016 - OSx update only
- New Mac OSx build for support of Sierra gatekeeper new settings. App is now certified.
v1.09 / May 24th 2016 / Plugin 1.09 + Firmware 1.29
- Added support for HDMI message logging with HDMI logger software (separate download)
- USB connection sometimes hanging up / Bug fix
v1.08 / Dec 2015 / New firmware only
- Added FW 1.26 to the ZIP file. Fixing potential lock up when changing source rapidely. Firmware upgrade only. See user manual on how to upgrade your firmware.
v1.08 / June 2015 / New software only
- Minor update to fix a compatibility issue with the latest Adobe Air release.
v1.07 / May 2015 / New firmware only (firmware)
- Update of firmware to v1.23 to support to fix HDMI bug with projectors without speakers.
- Firmware included inside the ZIP file. See user manual for more info on upgrade steps.
- No update of the plug-in.
v1.07 / April 2015 (minor)
- Update of the plug-in to provide support for the nanoAVR HDA platforms.
- Update required only if you have a nanoAVR HDA
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
Dirac Live Calibration tools for nanoAVR DL series -
Build 1.2 / Oct 2016 - Minor update (no major modifications)
- New Dirac Live build for 8ch support for DDRC-88BM support (no need for script anymore)
- New license registration process doesn't require activation anymore on first installation. Dirac Live will automatically handshake with the hardware License on your unit to activate it.
This build is a minor upgrade to simplify existing installation on 8ch Dirac Live platforms.
Build 8244 / April 2016
- Fixing unable to recognize Umik-1 under MAC OSx 10.11.4
Build 6937 / July 2015
- Adding Mac OSx version - Please read user manual for additional information.
- Please download the DDRC-88 utility file separately for the Mac firmware upgrade tools.
Build 6607 released on June 1st 2015:
Fixing minor bugs:
- Crash of software at boot of the application in some specific case due to the DLL being loaded twice. Fix on Dirac Live software.
- NOTE: No update is required unless you're seeing a crash of software at boot up. No restore to default, no firmware upgrade required if upgrading from Build 5939.
Build 5939 released on April 15th 2015:
Fixing minor bugs:
1. Whenever a filter is dragged into the slot, the slot is now high-lighted as active slot.
2. On win8 32bit and some specific hardware configuration, DLCT crashed at gain and delay calculations after user clicked optimize button in filter design page. No more GPF issue.
3. Added levels label (in dB unit) beside the master and channel volume sliders so that users can know the volume levels when adjusting the sliders.
4. Adding support for the multizone setup. See application note here.
Installation steps for existing customers:
- Download software and Install new nanoAVR DL utility & new Dirac Live Calibration Tools. They will updated automatically so no need to uninstall your previous version.
- If you've missed the previous update (i.e. Build 5692 in Feb 2015), you will need to open the nanoAVR DL utility and restore to default such that it clears all the DSP configurations.
- With these minor DLCT software change, there isn't any need to redo your measurements. You can safely open and load a new project.
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
nanoAVR DL IR programmer - Used together with Dirac Live tools for configuration fo the nanoAVR DL
VERSION LOG
Rev 1.06 / Oct 2016
- New Mac OSx build for support of Sierra gatekeeper new settings. App is now certified.
Rev 1.05 / June 2016
New firmware + new plugin requiring upgrade.
- Embedded a debug firmware function so that user are not required to update the firmware for debug logging, just need to connect to the 'MiniDSP_Logger' app and click 'Debug Enabled' to print out the log through Ethernet.
- Fixed the bug of device halted when sending data out from USB to Windows 10 PC which happened when changing volume or switching sources/presets.
- Re-assert the channel mode to the downstream AVR after HDCP handshake was completed. This is used as a workaround for some downstream AVRs which default back to stereo mode after HDCP handshake which cannot get back to multi-channel mode by itself.
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
PWR-ICE 2x2 plugin with FIR support.
Rev1.0 / Nov 2016
- First release of PWR-ICE plugin with FIR support / See user manual for details.
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
PWR-ICE plug-in for PWR-ICE125/250 allowing for stereo operation: 2xIN , 2xOUT AND 1x2 support.
IIR (biquad) EQ only. If you want FIR + IIR, please consult the
v1.6 / Feb 2017
- Solving minor bug when toggling from FIR plugin to IIR plugin.
v1.5 / Oct 2016
- New Mac OSx build for support of Sierra gatekeeper new settings. App is now certified.
- Support for new Android app.
v1.4 + FW3.2 Sept 2016
- Release for compatibility with new Android/IoS app remote
V1.3 Update of Sept/2015:
- Bug on the PEQ bypass updated for advanced mode. Improving- Improving connectivity
- Make sure to upgrade firmware (available inside the ZIP file)
NOTE: There might be a potential error of certificate when doing an upgrade from an old plug-in. Make sure you uninstall the plug-in first before installing v1.3.
V1.1 Update of 05/08/2014: Adding Mac support
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
Release 22/07/2016
- Adding TDM8 support for USBStreamer. I2S_Data_IN1/OU1 used for data transfer. Support for 48/44.1k only.
- Adding STEREO only support for USBStreamer for customers running on Win OS and not able to route Audio via ASIO to TOSLINK out 9&10. The USBStreamer becomes a 2ch device in/out.
Release 25/02/2016
- Windows driver for USBStreamer device with ASIO/WDM support.Signed driver for Windows 10/8/7/Vista/XP
This driver must be downloaded and installed on all Windows PC platforms no matter the USB Streamer firmware version you're running.
- Firmware binary files are included as part of the ZIP file and organized with following folder structure
ADAT_I2S: 8ch bidirectional 48/44.1k over ADAT format + I2S
TOSLINK_I2S: Stereo Toslink + 8ch bidirectional
Low sample rate: Low sample rate support
In each folder, 2 x binary files are included in case you are using 2 x USBStreamer concurrently. Flash one unit with a different ID# to be able to discover both units.
- Mac OSx firmware upgrade tools under "miniDSP_UAC2_DFU_OSX" folder
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno
Release 25/02/2016
- Windows driver for USBStreamer device with ASIO/WDM support.Signed driver for Windows 10/8/7/Vista/XP
This driver must be downloaded and installed on all Windows PC platforms no matter the UDAC8 firmware version you're running.
- Firmware binary files are included as part of the ZIP file and organized with following folder structure
ADAT_I2S: 8ch bidirectional 48/44.1k over ADAT format + I2S
TOSLINK_I2S: Stereo Toslink + 8ch bidirectional
Low sample rate: Low sample rate support
UDAC8: Run only for UDAC8
In each folder, 2 x binary files are included in case you are using 2 x USBStreamer concurrently. Flash one unit with a different ID# to be able to discover both units.
- Mac OSx firmware upgrade tools under "miniDSP_UAC2_DFU_OSX" folder
10,00 €
IVA inclusa
Spedizione gratuita nei seguenti Paesi: Albania, Andorra, Austria, Belgio, Bielorussia, Bosnia Erzegovina, Bulgaria, Cipro, Repubblica Ceca, Svizzera , Croazia, Danimarca, Estonia, Federazione Russa, Finlandia, Francia, Georgia, Germania, Gibilterra, Grecia, Irlanda, Islanda, Isole Faroe, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Moldavia, Monaco, Montenegro, Montserrat, Norvegia, Paesi Bassi, Polonia, Portogallo, Regno Unito, Repubblica di Macedonia, Romania, San Marino, Slovacchia, Slovenia, Spagna, Svalbard e Jan Mayen, Svezia, Turchia, Ucraina, Ungheria, Vaticano Mostra di più Mostra meno